Bosch axt rapid 180 manual

Do not rapidly switch off and on. It will now. Note: The machine will not start unless the securing. Note: The blade will stop automatically before the. After a mains failure, or if the product cuts out due to.

Overloading e. In order to collect the chopped material, fasten the. Feed the material to be chopped through the feed in-. Do not use the machine, if the cords are damaged. The product is intended for cutting of fibrous and woody garden waste for composting.

When operating the machine with a generator, a unit with a power rating of 4 KVA is necessary. Electrical Safety Your machine is double insulated for safety and re- quires no earth connection. Only use approved extension cables. If you want to use an extension cable when operat- ing your product, only the following cable dimen- sions should be used: — 1.

The couplings of connection leads must be pro- tected against splashes and the coupling sockets on the leads must be made of rubber or coated with rubber.

Fixing means for the connection leads must be used. The connection lead must be inspected for signs of damage at regular intervals and may only be used if in perfect condition. If the supply cord is damaged, it must be replaced by a Bosch Service Centre. Rated power [W] No-load speed [rpm] Capacity max. Switch off, remove plug from mains before adjusting, cleaning or if cable is cut, damaged or entangled. The blades continue to rotate for a few sec- onds after the machine is switched off.

Caution — do not touch rotating blades. F L70 If the fitted plug is not suitable for your socket out- lets, it should be cut off and an appropriate plug fit- ted in its place. The severed plug must be disposed of to avoid a possible shock hazard and should never be inserted into a 13 A socket elsewhere.

Remove the machine from the package. Mount the wheels and the undercarriage. Fit the Allen key 12 as shown. The blade continues to rotate for a few seconds after the machine is switched off. Do not rapidly switch off and on. As a safety feature the machine will not start unless the hopper securing knob 3 is fully tightened.

Note: The blade will stop automatically before the cover 11 can be removed. Restart Protection After a mains failure, or if the product cuts out due to overloads, the machine cannot restart on its own when the power returns or when protector resets.

Overload Protection Overloading e. Af- ter a short period, the machine can be switched on again. If the machine blocks again turn it off. In order to collect the shredded material, fasten the carrying straps of the collecting bag 7 accessory to the two hooks 9. Feed the material to be shredded through the feed intake. Longer material standing out from the ma- chine could lash out when being cut!

Small pieces of shredded material may be ejected from the feed intake. Ensure eye protection, protective gloves and ear pro- tection are used when using the machine. Only insert as much material so that the feed in- take 1 will not be blocked up. Do not fill soft waste such as kitchen rubbish into the shredder but compost directly. Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence.

When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share. For example, Anti-Semitic content, racist content, or material that could result in a violent physical act. For example, a credit card number, a personal identification number, or an unlisted home address.

Note that email addresses and full names are not considered private information. Note that email addresses and full names are not considered private information. Would you like to receive an email when new answers and questions are posted?

Please enter your email address. Do you have a question about this product?